|from 1||150,42 €||179,00 €|
ZEUS 308 XT PLUS High-Performance KIT 3500k+Hyper-Red
The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.
The ZEUS 308 XT PCBs offer you completely new possibilities to realize demanding applications. Through the sockets you can easily extend your application almost infinitely.
Easy feeding without soldering! The insulated conductor is simply inserted into the clamping point as far as it will go and automatically fixed securely. Please use solid and stripped wires.
This KIT includes:
The advantages at a glance:
- up to 218 lm/W
- easy installation
- high luminous flux
- CRI up to 94 possible
- individually stackable
- based on constant current
- 308x Samsung LEDs per board
- very good price / performance ratio
- fast and easy handling through plug-in system
- optimized surface illumination, e.g. grow, advertising space
- solderless PCB with sockets for rigid strands (0.2 - 0.75 mm²).
- 2-Channel PCB each channel individually controllable via a separate power supply
We distinguish the SYSTEM modules between CC and CV modules. Please note the product subtitle.
|0,7 A||37,21 V||26,047 W|
|1,0 A||37,61 V||37,614 W|
|1,5 A||38,00 V||57,000 W|
|2,0 A||38,60 V||77,200 W|
|3,0 A||39,47 V||118,410 W|
|3,3 A||39,63 V||130,779 W|
|3,5 A||39,88 V||139,580 W|
|0,7 A||5.694 lm||218.64 lm/W|
|1,0 A||7.901 lm||210.09 lm/W|
|1,5 A||11.688 lm||205.06 lm/W|
|2,0 A||15.312 lm||198.35 lm/W|
|3,0 A||22.406 lm||189.22 lm/W|
|3,3 A||23.866 lm||182.50 lm/W|
|3,5 A||25.339 lm||181.54 lm/W|
|350 mA||23,25 V||32.48||3,99||5950 mW|
|700 mA||25.13 V||63.81||3,63||11670 mW|
|1000 mA||26,49 V||90,69||3,42||19590 mW|
The values shown in the table are averages of the 660nm LEDs (Osram OSLON Square hyper-red).
If Channel 1 (3500K LEDs) operates at 3.5A, Channel 2 (660nm LEDs) should be operated at a maximum of 700mA.
For the ZEUS boards we can recommend the following power supplies:
LT-3541 for one board
LT-3805 for one board (externally dimmable)
LT-3636 for up to two boards (parallel)
LT-3992 for up to two boards (parallel, externally dimmable)
LT-3364 for up to four boards (parallel)
LT-4019 for up to four boards (parallel, externally dimmable)
LT-3317 dimmer for MeanWell power supply
The board offered here is 100% compatible with our SYSTEM250 construction kit. Our support will gladly assist you in the planning/design of your personal SYSTEM250 application. The gallery shows a sample composition.
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.