|from 1||12,52 €||14,90 €|
|Operating temperature||-40 ~ +85|
The Do-It-Yourself (DIY) CoverLine illuminate KIT combines our powerful CoverLine
aluminum profile with one of the
25cm long stripe pcbs with 21x Samsung LM301 LEDs
(available in different colored light temperatures).
This DIY-KIT contains all components to build a 25cm high-performance LED light with little effort. You only need a sufficiently dimensioned power supply, depending on the number of lights that are to be operated.
The included high-performance LED strip can be operated from 100mA to 1400mA. This results in a power consumption of 0.8W - 13W per lamp.
If you have any further questions, we would be happy to help you plan your individual project. Please contact our support.
Scope of delivery:
1x LT-5449 CoverLine Aluminium LED Profile 25cm (without Cover)
1x LT-3379 Heat Conductive Pad for 21x Samsung LM301B stripes
1x LT-5447 CoverLine V2 acrylic cover 25cm
2x LT-4512 CoverLine V2 end cap flat 3D printing with cable entry silver
1x LT-3101 Core conductor rigid 0,5mm² 50cm red
1x LT-3102 Core conductor rigid 0,5mm² 50cm black
1x 25cm Stripe with 21x Samsung LM301 LEDs in selected light color
|100 mA||7,80 V||0,780 W|
|350 mA||8,06 V||2,821 W|
|700 mA||8,28 V||5,796 W|
|1050 mA||8,47 V||8,894 W|
|1400 mA||8,61 V||12,054 W|
|100 mA||194 lm||248,40 lm/W|
|350 mA||667 lm||236,69 lm/W|
|700 mA||1298 lm||223,95 lm/W|
|1050 mA||1898 lm||213,41 lm/W|
|1400 mA||2468 lm||204,75 lm/W|
|700 mA||17,77 ||3,07|
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.