|from 1||25,13 €||29,90 €|
50cm MIXED alu stripe with 60x Samsung LM301B 6500K + 5x Osram OSLON SSL deep-blue LEDs
The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.
Most compact high-power LED of the third generation of OSLON Square with well known
superior robustness, high reliability, long lifetime and low thermal
The advantages at a glance:
- easy installation
- high luminous flux
- individually stackable
- based on constant current
- 60x Samsung LEDs per board
- 5x Osram LEDs per board
- very good price / performance ratio
- fast and easy handling through plug-in system
- optimized surface illumination, e.g. grow, advertising space
||27.07 V||5.414 W|
||27.42 V||8.226 W|
||27.56 V||9.646 W|
||27.70 V||11.080 W|
||27.97 V||13.985 W|
||28.21 V||16.926 W|
|0.700 A||28.43 V||19.901 W|
|0.800 A||28.65 V||22.920 W|
|0.900 A||28.84 V||25.956 W|
|1.000 A||29.04 V||29.040 W|
||622 lm||115.02 lm/W|
||928 lm||112.86 lm/W|
||1080 lm||111.96 lm/W|
||1230 lm||111.01 lm/W|
||1527 lm||109.19 lm/W|
||1820 lm||107.53 lm/W|
|0.700 A||2112 lm||106.13 lm/W|
|0.800 A||2395 lm||104.49 lm/W|
|0.900 A||2681 lm||103.29 lm/W|
|1.000 A||2960 lm||101.93 lm/W|
Scope of delivery:1x LT-4239 50cm MIXED alu stripe with 60x Samsung LM301B 6500K + 5x Osram OSLON SSL deep-blue LEDs
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.