Facebook Messenger

Chat with us!

You agree that data will be send to Facebook

Privacy statement

320 XT PLUS High-Performance KIT CRI90 3500k+660nm

CC module


UVP 179,00 €

Amount Netto Brutto
from 1 116,81 € 139,00 €
Prices plus shipping costs

Part number:

Target country of delivery


Technical Data

Unit Value
Beam 120°
Height 5.4mm
Width 285mm
Length 440mm
Unit min. typ. max.
Lumen 2668lm 20032lm 24844lm
PPF 49.07µMol/s 358.99µMol/s 458.52µMol/s
Kelvin 3500K
Wavelength 660nm
CRI 90


Datasheet 2.6 MB
Datasheet 1.22 MB
RoHS 444.37 KB
REACH 303.65 KB
Chemical Compatibility 723.42 KB
Datasheet 2.19 MB

Product video


LED-TECH.DE 320 XT PLUS High-Performance KIT CRI 90 3500k+660nm

The LED-TECH.DE 320 XT PLUS boards (2-channel) are distinguished from the LED-TECH.DE 300 XT PLUS boards (1-channel) by additional high-power LEDs. Controllable and dimmable via TWO power supplies, Other color combinations are possible on request.

The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.

The LED-TECH.DE 320 XT PCBs offer you completely new possibilities to realize demanding applications. Through the sockets you can easily extend your application almost infinitely.

Easy feeding without soldering! The insulated conductor is simply inserted into the clamping point as far as it will go and automatically fixed securely. Please use solid and stripped wires.

This KIT includes:

  • 1x LED-TECH.DE 320 XT PLUS Board in (LM301H CRI90) + 660nm Hyper-Red (Osram OSLON Square Gen. 4)
  • 4 Slot Nuts
  • 6 Flat Washer (incl. 2 reserves flat washes)

The advantages at a glance:

- up to 218 lm/W

- easy installation
- high luminous flux
- CRI up to 94 possible
- individually stackable
- based on constant current
- 308x Samsung LEDs per board
+ 12 Osram-LEDs
- very good price / performance ratio
- fast and easy handling through plug-in system

- optimized surface illumination, e.g. grow, advertising space

- s
olderless PCB with sockets for rigid strands (0.2 - 0.75 mm²).
- 2-Channel PCB
each channel individually controllable via a separate power supply

- ATTENTION! For use with constant CURRENT only!

We distinguish the modules between CC and CV modules. Please note the product subtitle.

  • CC module = Constant Current
  • CV module = Constant Voltage

    Current Voltage Power
    0.350 A 36.55 V 12.79 W
    0.700 A 37.15 V 26.00 W
    1.050 A 37.60 V 39.48 W
    1.400 A 37.99 V 53.19 W
    1.750 A 38.33 V 67.08 W
    2.100 A 38.65 V 81.17 W
    2.800 A 39.23 V 109.84 W
    3.500 A 39.77 V 139.20 W
    Current Lumen Lumen/W
    0.350 A 2532 lm 197.97 lm/W
    0.700 A 5038 lm 193.77 lm/W
    1.050 A 7494 lm 189.82 lm/W
    1.400 A 9908 lm 186.28 lm/W
    1.750 A 12270 lm 182.92 lm/W
    2.100 A 14605 lm 179.93 lm/W
    2.800 A 19155 lm 174.39 lm/W
    3.500 A 23592 lm 169.48 lm/W
    Current µMol/s µMol/joule
    0.350 A 38.56 3.01
    0.700 A 76.46 2.94
    1.050 A 113.41 2.87
    1.400 A 149.60 2.81
    1.750 A 184.88 2.76
    2.100 A 219.64 2.71
    2.800 A 287.12 2.61
    3.500 A 352.56 2.53
    The values shown in the table are averages of the 3500K CRI90 LEDs.

    100 mA
    21.16 V
    2.116 W
    350 mA
    22.56 V
    7.896 W
    700 mA
    24.04 V
    16.828 W
    1050 mA
    25.33 V
    26.567 W
    The values shown in the table are averages of the 660nm LEDs (Osram OSLON Square hyper-red).


    If Channel 1 (CRI90 3500K LEDs) operates at 3.5A, Channel 2 (660nm LEDs) should be operated at a maximum of 700mA.

    For the boards we can recommend the following power supplies:

    SYSTEM250 compatibility
    The board offered here is 100% compatible with our SYSTEM250 construction kit. Our support will gladly assist you in the planning/design of your personal SYSTEM250 application. The gallery shows a sample composition.

    Successful usage of high power LEDs:

    Heat management
    Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

    Drive management
    LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

    EMC protection
    LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

    Storage / JEDEC level
    The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

    Soldering conditions
    Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.

    Delivery time

    Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.