Hang up the grow light
Assembly instruction: Mounting instruction of a 54x58cm DIY-240W-KIT
Overview Page backward Page forward
working time
5 min.
difficulty
beginner
Steps
2
1 Prepare material
2 x Prohanger
4x cable ties (UV-resistant, reusable)
2 Mount hanger
Please take care of sufficient load capacity when hanging the light. Also check that the carabiner are always closed and the knots are tighten well.
Fasten the cable ties in four places on the ceiling above the light.
Now attach the carabiner to the cable tie above the lamp with the ratchet. Repeat the process on all four cable ties.
Push the cable tie with the carabiner to the desired hanging point and tighten the cable tie.
Now attach the carabiner to the eyebolt on the frame without a ratchet. Repeat the process on all four cable ties.
Now you can level the light of your desired height.
© LED-TECH.DE - Disclaimer: Mounting and operating only by qualified (electric-)staff. We do not assume any liability.