Facebook Messenger

Chat with us!

You agree that data will be send to Facebook

Privacy statement


CC module


Amount Netto Brutto
from 1 92,35 € 107,13 €
Prices plus shipping costs

Product Datasheet
Part number:


Technical Data

Unit Value
Efficiency rating A++
Light color neutral-white
Beam 120°
Height 25mm
Width 200mm
Length 285mm
Unit min. typ. max.
Lumen 3109lm 16904lm 28353lm
PPF 42.68µMol/s 231.75µMol/s 388.85µMol/s
Kelvin 4000K
CRI 80 80 80
Voltage 36.90V 38.93V 40.11V
Current 350mA 2000mA 3500mA


Datasheet 2.6 MB

Product video


SYSTEM250 ZEUS 308 COMPACT KIT in 4000K neutral-white

The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.

The ZEUS 308 PCBs offer you completely new possibilities to realize demanding applications. Through the sockets you can easily extend your application almost infinitely.

Easy feeding without soldering!

Terminals: The insulated conductor is simply inserted into the clamping point as far as it will go and automatically fixed securely. Please use solid and stripped wires.

Connector: The already pre-assembled connector simplifies the operation of the modules especially in combination with the inputcable LT-3006.

We recommend using the modules with passive cooling with a maximum of 3A.

The advantages at a glance:

- up to 240 lm/W

- easy installation
- high luminous flux
- individually stackable
- based on constant current
- 308x Samsung LEDs per board

- very good price / performance ratio
- fast and easy handling through plug-in system

- optimized surface illumination, e.g. grow, advertising space

- s
olderless PCB with sockets for rigid strands (0.2 - 0.75 mm²).

In our test, we achieved the following values at an ambient temperature of ~ 20 ° C:

The ZEUS 308 was supplied with 2A without heat sink (38.6V, 77.2W, 15.500lm) and warmed up to approx. 50 ° C

Scope of delivery:
- 1x ZEUS 308 PCB with assembled cooler and connector (female)
- 4x SYSTEM sliding block (M4)
- 4x SYSTEM screw (M4)
- 6x SYSTEM transparent flat washer
- 1x Connector (male) with ~ 10cm cable and ~ 2cm shrink sleeve (transparent)

- ATTENTION! For use with constant CURRENT only!

We distinguish the SYSTEM modules between CC and CV modules. Please note the product subtitle.

  • CC module = Constant Current
  • CV module = Constant Voltage

  • Current Voltage Power
    0.35 A
    36.90 V
    12.92 W
    0,7 A 37.49 V
    26.24 W
    1,0 A 37.88 V
    37.88 W
    1,5 A 38.44 V
    57.66 W
    2,0 A 38.93 V
    77.86 W
    3,0 A 39.80 V
    73.74 W
    3,3 A 40.03 V
    132.10 W
    3,5 A 40.11 V
    140.39 W

    Current Lumen Lumen/W
    0.35 A
    3109 lm
    240,80 lm/W
    0,7 A 6153 lm
    234.50 lm/W
    1,0 A 8709 lm
    229.92 lm/W
    1,5 A 12851 lm
    222.88 lm/W
    2,0 A 16904 lm
    217.11 lm/W
    3,0 A 24698 lm
    206.86 lm/W
    3,3 A 26850 lm
    203.26 lm/W
    3,5 A 28353 lm
    201.97 lm/W

    Current µMol/s µMol/joule
    0.35 A
    0,7 A 84.42
    1,0 A 119.45
    1,5 A 176.26
    2,0 A 231.75
    3,0 A 338.58
    3,3 A 368.26
    3,5 A 388.85
    The values shown in the table are averages of the 4000K modules.

    For the ZEUS boards we can recommend the following power supplies:

    LT-3541 for one board
    LT-3805 for one board (externally dimmable)

    LT-3636 for up to two boards (parallel)
    LT-3992 for up to two boards (parallel, externally dimmable)

    LT-3364 for up to four boards (parallel)
    LT-4019 for up to four boards (parallel, externally dimmable)

    LT-3317 dimmer for MeanWell power supply

    SYSTEM250 compatibility
    The board offered here is 100% compatible with our SYSTEM250 construction kit. Our support will gladly assist you in the planning/design of your personal SYSTEM250 application. The gallery shows a sample composition.

    Successful usage of high power LEDs:

    Heat management
    Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

    Drive management
    LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

    EMC protection
    LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

    Storage / JEDEC level
    The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

    Soldering conditions
    Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.

    Delivery time

    Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.