×
Facebook Messenger

Chat with us!

You agree that data will be send to Facebook


Privacy statement
   

SYSTEM bundle: 4x ZEUS 308 XT in 3000k + frame kit 90x90

CC modules

Varianten

UVP 458,74 €

Amount Netto Brutto
from 1 357,10 € 424,95 €
Prices plus shipping costs

Part number:
LT-4129



Target country of delivery

Amount

Technical Data

Unit Value
Light color warm-white
Beam 120°
Width 900mm
Length 900mm
 
Unit min. typ. max.
Lumen 10896lm 42628lm 100840lm
PPF 154.18µMol/s 600.43µMol/s 1414.24µMol/s
Kelvin 3000K
CRI 80 80 80
Voltage 36.47V 38.03V 39.95V
Current 1400mA 5600mA 14000mA

Downloads

Datasheet 2.6 MB
RoHS 444.37 KB
REACH 303.65 KB
Chemical Compatibility 723.42 KB

Product video

Description

4x ZEUS 308 XT High-Performance KIT (3000k) + frame kit 90x90cm

The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.

The ZEUS 308 XT PCBs offer you completely new possibilities to realize demanding applications. Through the sockets you can easily extend your application almost infinitely.

This KIT includes:

  • 4x ZEUS 308 XT Board in 3000K
  • 16x Slot Nuts + 16x Screws
  • 24x Flat Washer
  • 4x 10cm Input Cable
  • 1x Angle Allen key 3mm
  • 4x SYSTEM end caps
  • 8x SYSTEM corner brackets
  • 4x SYSTEM profile 86cm (20x20)
  • 2x SYSTEM profile 90cm (20x20)

  • ATTENTION: suspension not included!
  • The specifications refer to four ZEUS 308 XT boards connected in parallel

The advantages at a glance:

- up to 232 lm/W

- easy installation
- high luminous flux
- individually stackable
- based on constant current
- 308x Samsung LEDs per board

- very good price / performance ratio
- fast and easy handling through plug-in system

- optimized surface illumination, e.g. grow, advertising space

- s
olderless PCB with sockets for rigid strands (0.2 - 0.75 mm²).

In our test, we achieved the following values at an ambient temperature of ~ 29 ° C:

The ZEUS 308 was supplied with 3.5A without heat sink (~ 140W) and warmed up to approx. 58.8 ° C

- ATTENTION! For use with constant CURRENT only!

We distinguish the modules between CC and CV modules. Please note the product subtitle.

  • CC module = Constant Current
  • CV module = Constant Voltage



  • For the ZEUS boards we can recommend the following power supplies:


    We also recommend the following accessories:

    LT-3697 SYSTEM mounting set for carabiner

    LT-3637 Garden Highpro Lighthanger
    LT-3638 Garden Highpro Prohanger
    LT-3693 Garden Highpro Prohanger XL
    LT-2507 Wire Mounting Set for Profile


    SYSTEM250 compatibility
    The board offered here is 100% compatible with our SYSTEM250 construction kit. Our support will gladly assist you in the planning/design of your personal SYSTEM250 application. The gallery shows a sample composition.

    Successful usage of high power LEDs:

    Heat management
    Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

    Drive management
    LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

    EMC protection
    LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

    Storage / JEDEC level
    The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

    Soldering conditions
    Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.

    Delivery time

    Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.