Facebook Messenger

Chat with us!

You agree that data will be send to Facebook

Privacy statement

SYSTEM bundle: 2x ZEUS 308 XT in 4000k + frame kit 29,5x100cm

CC modules


UVP 229,99 €

Amount Netto Brutto
from 1 176,43 € 209,95 €
Prices plus shipping costs

Part number:

Target country of delivery


Technical Data

Unit Value
Light color neutral-white
Beam 120°
Width 295mm
Length 1000mm
Unit min. typ. max.
Lumen 6218lm 33808lm 56706lm
PPF 85.36µMol/s 463.50µMol/s 777.70µMol/s
Kelvin 4000K
CRI 80 80 80
Voltage 36.90V 38.93V 40.11V
Current 700mA 4000mA 7000mA


Datasheet 2.6 MB
RoHS 444.37 KB
REACH 303.65 KB
Chemical Compatibility 723.42 KB

Product video


When purchasing a SYSTEM bundle the included frame is discounted at 50% compared to individual purchases.

2x ZEUS 308 XT High-Performance KIT (4000k) + frame kit 29,5x100cm

The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.

The ZEUS 308 XT PCBs offer you completely new possibilities to realize demanding applications. Through the sockets you can easily extend your application almost infinitely.

This KIT includes:

  • 2x ZEUS 308 XT Board in 4000K
  • 8x Slot Nuts + 8x Screws
  • 12x Flat Washer
  • 2x 10cm Input Cable
  • 1x Angle Allen key 3mm
  • 4x SYSTEM end caps
  • 4x SYSTEM corner brackets
  • 2x SYSTEM profile 29,5cm (20x20)
  • 2x SYSTEM profile 100cm (20x20)

  • ATTENTION: suspension not included!
  • The specifications refer to two ZEUS 308 XT boards connected in parallel

The advantages at a glance:

- up to 240 lm/W

- easy installation
- high luminous flux
- individually stackable
- based on constant current
- 308x Samsung LEDs per board

- very good price / performance ratio
- fast and easy handling through plug-in system

- optimized surface illumination, e.g. grow, advertising space

- s
olderless PCB with sockets for rigid strands (0.2 - 0.75 mm²).

In our test, we achieved the following values at an ambient temperature of ~ 29 ° C:

The ZEUS 308 was supplied with 3.5A without heat sink (~ 140W) and warmed up to approx. 58.8 ° C

- ATTENTION! For use with constant CURRENT only!

We distinguish the modules between CC and CV modules. Please note the product subtitle.

  • CC module = Constant Current
  • CV module = Constant Voltage

  • For the ZEUS boards we can recommend the following power supplies:

    We also recommend the following accessories:

    LT-3697 SYSTEM mounting set for carabiner

    LT-3637 Garden Highpro Lighthanger
    LT-3638 Garden Highpro Prohanger
    LT-3693 Garden Highpro Prohanger XL
    LT-2507 Wire Mounting Set for Profile

    SYSTEM250 compatibility
    The board offered here is 100% compatible with our SYSTEM250 construction kit. Our support will gladly assist you in the planning/design of your personal SYSTEM250 application. The gallery shows a sample composition.

    Successful usage of high power LEDs:

    Heat management
    Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

    Drive management
    LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

    EMC protection
    LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

    Storage / JEDEC level
    The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

    Soldering conditions
    Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.

    Delivery time

    Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.