SYSTEM150 Butterfly with 144x LM301B LEDs in 3000K

CC modules*

Varianten

Amount	Netto	Brutto
from 1	25,13 €	29,90 €

Prices plus shipping costs

Part number:
LT-5437

Target country of delivery

Amount

Frequently bought together

Heat Conduct......

Butterfly X-......

Technical Data

Unit	Value
Light color	warm-white
Housing Color	white
Beam	120°
Height	5.4mm
Width	185mm
Length	185mm
Dimmable	YES

Unit	min.	typ.	max.
Lumen	660lm	4506lm	14277lm
PPF	9.63µMol/s	65.45µMol/s	206.39µMol/s
Kelvin		3000K
Voltage	31.06V	32.52V	34.64V
Current	100mA	700mA	2400mA

Downloads

RoHS	444.37 KB
REACH	303.65 KB
Chemical Compatibility	723.42 KB

Product video

Description

SYSTEM150 Butterfly with 144x Samsung LM301B LEDs in 3000K

The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.

Easy feeding without soldering! The insulated conductor is simply inserted into the clamping point as far as it will go and automatically fixed securely. Please use solid and stripped wires.

The advantages at a glance:

- over 200 lm/W
- easy installation
- high luminous flux
- individually stackable
- based on constant current
- 144x Samsung LEDs per board
- very good price / performance ratio
- fast and easy handling through plug-in system
- optimized surface illumination, e.g. grow, advertising space
- solderless PCB with sockets for rigid strands (0.2 - 0.75 mm²).

- no heat sink needed @700mA
- expandable with 7x SYSTEM Slider
7x SYSTEM SLIDER can be easily adapted to the butterfly circuit boards.

Connected in series with up to 700mA possible without an additional heat sink. In our test (ambient temperature ~22°C) the pcb reached a temperature of ~49°C (SYSTEM butterfly) up to ~55°C (SYSTEM slider)
Gallery picture 3

Current	Voltage	Power
0.100 A	31.06 V	3.11 W
0.350 A	31.85 V	11.15 W
0.500 A	32.16 V	16.08 W
0.700 A	32.52 V	22.76 W
1.050 A	33.04 V	34.69 W
1.400 A	33.50 V	46.90 W
2.100 A	34.34 V	72.11 W
2.400 A	34.64 V	83.14 W

Current	Lumen	Lumen/W
0.100 A	660 lm	212.22 lm/W
0.350 A	2298 lm	206.10 lm/W
0.500 A	3257 lm	202.55 lm/W
0.700 A	4506 lm	197.98 lm/W
1.050 A	6632 lm	191.18 lm/W
1.400 A	8701 lm	185.52 lm/W
2.100 A	12641 lm	175.30 lm/W
2.400 A	14277 lm	171.72 lm/W

Current	µMol/s	µMol/joule
0.100 A	9.63	3.10
0.350 A	33.44	3.00
0.500 A	47.34	2.94
0.700 A	65.45	2.88
1.050 A	96.21	2.77
1.400 A	126.08	2.69
2.100 A	182.84	2.54
2.400 A	206.39	2.48

The values shown in the table are averages of the 3000K modules.

- ATTENTION! For use with constant CURRENT only!

*We distinguish the modules between CC and CV modules. Please note the product subtitle.

CC module = Constant Current

CV module = Constant Voltage

Successful usage of high power LEDs:

Heat management
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

Drive management
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

IP protection
Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.

EMC protection
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

Soldering conditions
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.

Delivery time

Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.

Chat with us!