LED Leuchten Shop

RGB power LED by Ledtech!!

New extremly flat RGB high power LED with 3x anodes and 3x cathodes - designed for operation in speciality lighting applications. Typical applications for this product are

- In Mood lighting
- Indoor / outdoor illumination
- Architectural lighting
- Stage lighting
- Signal lighting
- Automotive interior lighting
- and many more...

This LED uses the multichip technic. The close chip placement achieves an exquisite color mix even with short distances to the illuminated surface. The 6pin layout allows to use it in almost all common applications and connection standarts.

Flexibility: Most of the Ledtech multichip LEDs can be ordered in user defined layout, too. For example it is also possible to get a 3x blue or 2x cold-white + 1x warm-white version. Please ask our support.

Successful usage of high power LEDs:

Heat management

Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

Drive management

LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

EMC protection

LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

Storage / JEDEC level

The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

Soldering conditions

Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.