| |
| Often bought together: |
|
CREE CXP optic 13°
Price from: 2,49 €
|
|
8 x CREE XP-E D5 on strip PCB
Price from: 34,90 €
|
|
CREE CXP optic 14° (frosted)
Price from: 2,49 €
|
|
8 x CREE XP-G R5 on strip PCB
Price from: 44,90 €
|
|
8 x CREE XP-G R2 on strip PCB
Price from: 44,90 €
|
|
8 x CREE XP-G R4 on strip PCB
Price from: 44,90 €
|
|
Meanwell Power Supply 1050mA (9-30V) IP67
Price from: 19,90 €
|
|
CREE CXP optic 29°
Price from: 2,49 €
|
|
CREE CXP optic 11°
Price from: 2,49 €
|
|
Meanwell Power Supply 1050mA (9-48V) IP67
Price from: 29,90 €
|
|
|
Part Number: LT-1838
8 x CREE XT-E on strip PCB
8 x Cree XTEARY N04 on strip PCB
| Viewing Angle: |
130° |
| Height: |
22.8 |
| Width: |
199.0 |
| Emitting Color: |
royal blue |
| Nanometer: |
452.5 - 455 |
| mW min.: |
4400 mW |
| mW max.: |
11040 mW |
| mA test.: |
350 mA |
| mA typ.: |
350 mA |
| mA max.: |
1000 mA |
| V typ.: |
22 V |
| V max.: |
24 V |
| Watt: |
7,7 W |
|
|
| Datasheet: |
Click here! |
| Optics: |
Click here! |
Aluminium round PCB with 8x CREE XP-E in D5 bin! XLamp XT-E Royal Blue is a high-performing source of royal blue light for remote-phosphor applications and sets new standards of efficiency and light extraction in royal-blue LEDs. The XT-E Royal Blue is designed to enable faster adoption of LED light in high-efficacy lighting products. Compared to the standard XLamp XP-E Royal Blue, the XT-E Royal Blue is up to 20% more efficient. Cree XLamp LEDs bring high performance and quality of light to a wide range of lighting applications, including remote-phosphor, color-changing, portable and personal, outdoor, indoordirectional, transportation, stage and studio, commercial and emergency-vehicle lighting. Successful usage of high power LEDs:
Heat management
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
Drive management
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
EMC protection
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Soldering conditions
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.
| Resistor for 5V-Betrieb: |
--- |
|
| Resistor for 9V-Betrieb: |
--- |
|
| Resistor for 12V-Betrieb: |
--- |
|
| Resistor for 14V-Betrieb: |
--- |
|
Prices incl. VAT with
additional shipping costs
|
