Cart

Hang up the grow light

Assembly instruction: Mounting instruction of a 90x90cm DIY-240W-KIT

Overview Page backward Page forward

working time

5 min.

difficulty

beginner

Steps

2

1 Prepare material

2 x Prohanger

4x cable ties (UV-resistant, reusable)

2 Mount hanger

Please take care of sufficient load capacity when hanging the light. Also check that the carabiner are always closed and the knots are tighten well.

Fasten the cable ties in four places on the ceiling above the light.

Now attach the carabiner to the cable tie above the lamp with the ratchet. Repeat the process on all four cable ties.

Push the cable tie with the carabiner to the desired hanging point and tighten the cable tie.

Now attach the carabiner to the eyebolt on the frame without a ratchet. Repeat the process on all four cable ties.

Now you can level the light of your desired height.

Tip: In the case of large frames, always attach the rear points first to facilitate assembly, e.g. in the boxes. Then lift the frame with one hand and hook in the front carabiners. (sample photo HOMEbox Ambient Q100 +)

Overview Page backward Page forward