×
Facebook Messenger

Chat with us!

You agree that data will be send to Facebook


Privacy statement
   

SYSTEM150 Butterfly with 144x LM301B LEDs in 3500K

CC module*

Varianten

Amount Netto Brutto
from 1 25,13 € 29,90 €
Prices plus shipping costs

Part number:
LT-5438



Target country of delivery

Amount

Technical Data

Unit Value
Light color warm-white
Housing Color white
Beam 120°
Height 5.4mm
Width 185mm
Length 185mm
Dimmable YES
 
Unit min. typ. max.
Lumen 683lm 4640lm 14735lm
PPF 9.71µMol/s 65.72µMol/s 208.27µMol/s
Kelvin 3500K
Voltage 31.23V 32.65V 34.77V
Current 100mA 700mA 2400mA

Downloads

RoHS 444.37 KB
REACH 303.65 KB
Chemical Compatibility 723.42 KB

Product video

Description

SYSTEM150 Butterfly with 144x Samsung LM301B LEDs in 3500K

The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.

Easy feeding without soldering! The insulated conductor is simply inserted into the clamping point as far as it will go and automatically fixed securely. Please use solid and stripped wires.

The advantages at a glance:

- over 200 lm/W
- easy installation
- high luminous flux
- individually stackable
- based on constant current
- 144x Samsung LEDs per board
- very good price / performance ratio
- fast and easy handling through plug-in system
- optimized surface illumination, e.g. grow, advertising space
- solderless PCB with sockets for rigid strands (0.2 - 0.75 mm²).

- no heat sink needed @700mA
- expandable with 7x SYSTEM Slider
7x SYSTEM SLIDER can be easily adapted to the butterfly circuit boards.

Connected in series with up to 700mA possible without an additional heat sink. In our test (ambient temperature ~22°C) the pcb reached a temperature of ~49°C (SYSTEM butterfly) up to ~55°C (SYSTEM slider)
Gallery picture 3



Current Voltage Power
0.100 A 31.23 V 3.12 W
0.350 A 31.99 V 11.20 W
0.500 A 32.30 V 16.15 W
0.700 A 32.65 V 22.85 W
1.050 A 33.18 V 34.84 W
1.400 A 33.64 V 47.10 W
2.100 A 34.47 V 72.39 W
2.400 A 34.77 V 83.45 W
Current Lumen Lumen/W
0.100 A 683 lm 218.91 lm/W
0.350 A 2367 lm 211.34 lm/W
0.500 A 3354 lm 207.68 lm/W
0.700 A 4640 lm 203.06 lm/W
1.050 A 6833 lm 196.13 lm/W
1.400 A 8967 lm 190.38 lm/W
2.100 A 13043 lm 180.18 lm/W
2.400 A 14735 lm 176.57 lm/W
Current µMol/s µMol/joule
0.100 A 9.71 3.11
0.350 A 33.58 3.00
0.500 A 47.53 2.94
0.700 A 65.72 2.88
1.050 A 96.69 2.78
1.400 A 126.81 2.69
2.100 A 184.41 2.55
2.400 A 208.27 2.50

The values shown in the table are averages of the 3500K modules.

- ATTENTION! For use with constant CURRENT only!

*We distinguish the modules between CC and CV modules. Please note the product subtitle.

  • CC module = Constant Current
  • CV module = Constant Voltage
  • Successful usage of high power LEDs:

    Heat management
    Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

    Drive management
    LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

    IP protection
    Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.

    EMC protection
    LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

    Storage / JEDEC level
    The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

    Soldering conditions
    Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.


    Delivery time

    Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.