|from 1||3,35 €||3,99 €|
|LT-3041||Gaggione LLC56N Optic (Narrow Beam)||4.7||ab 12,90 €|
|LT-2900||Gaggione LLC66N7 Silicone Collimator||4.9||ab 10,99 €|
|LT-1813||Gaggione LLC49R Optic 45mm (XM-L, XP-G, XB-D, OSLON...)||5.9||ab 8,90 €|
|LT-1211||Gaggione Mobdar extra narrow||7.0||ab 5,90 €|
|LT-2179||Gaggione LLC49N Optic 45mm (XM-L, MK-R)||7.3||ab 8,90 €|
|LT-2899||Gaggione LLC05N7 Silicone Collimator||8.0||ab 3,49 €|
|LT-1818||Gaggione LLS05 Optic 32mm (XM-L, XP-G, XB-D...)||8.3||ab 3,90 €|
|LT-2759||Gaggione LLC17N||9.3||ab 8,90 €|
|LT-1820||Gaggione LLS12N Optic 16mm (XP-G, XB-D, OSLON...)||16.5||ab 2,90 €|
|LT-1843||Gaggione LLS01M Optic 16mm||19.9||ab 2,90 €|
|LT-1987||Gaggione LLC49W Optic 45mm (MC-E)||30.8||ab 8,90 €|
Osram Oslon SSL120 Plug&Light Star
Solderless Star-PCB with WAGO PUSH WIRE® Technology
Easy feeding without soldering!
The insulated conductor is simply inserted into the clamping point as far as it will go and automatically fixed securely.
Please use solid wires and make sure that you have stripped the wire.
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.