×
Facebook Messenger

Chat with us!

You agree that data will be send to Facebook


Privacy statement
    Osram Oslon Serie   >   OSRAM Oslon SSL 80 yellow on SYSTEM Slider

OSRAM Oslon SSL 80 yellow on SYSTEM Slider

CC module | Oslon SSL 80 LYCP7P-JRJT (JT)

Varianten

Amount Netto Brutto
from 1 3,35 € 3,99 €
Prices plus shipping costs

Part number:
LT-3607



Amount

DAYTRADE-INFO informs you via email when this part is on offer. Please log in to use this function. Thank you very much.

Technical Data

Unit Value
Light color yellow
Beam 80°
Height 3.85mm
Width 16.0mm
Length 45.0mm
 
Unit min. typ. max.
Lumen 15.25lm 61lm 138.18lm
Wavelength 590nm
Voltage 2.0V 2.2V 2.6V
Current 100mA 350mA 1000mA

Downloads

Datasheet 1.88 MB

Product video

Description

The latest addition to the SYSTEM range of LED-TECH.DE.

The Slider modules are individually placeable Plug&Light light sources available with different LED types, light colors and color temperatures. The pcbs can be repositioned and fixed as often as required without any damage by means of sliding nuts sliding in the profile. A special thermal pad on the bottom not only provides non-slip grip but also optimal permanent heat dissipation.

Between the terminals the Slider have enough space for secondary optics with which the radiation characteristics can be adapted to your wishes. Optics are also available in our shop.

  • Individually expandable
  • Compatible with all SYSTEM profiles.
  • Easy installation without sticking due to reusable heat conducting foil. Secure mounting with SYSTEM slot nuts and screws (mounting kit sold separately).
  • Simple feed without soldering! The stripped conductor is simply inserted into the terminal point as far as it will go and automatically clamped securely. Please use rigid and stripped cables.

  • The extensive range of accessories is constantly expanding and optimizing. Project security: Each individual component can be purchased separately!

    We distinguish the SYSTEM modules between CC and CV modules. Please note the product subtitle.

  • CC module = Constant Current
  • CV module = Constant Voltage

  • The Osram OSLON SSL is predestinated for lighting applications with high demands. Because of the wide viewing angle of 80° many applications do not need additional secondary optics anymore.

    Features

    • package: SMt ceramic package with silicon resin with lens
    • typical Luminous Flux: 61 lm at 350 mA (66 lm at 100 mA)
    • feature of the device: small size high-flux LED for slim designs
    • wavelength: 590nm
    • viewing angle: 80°
    • technology: ThinfilmInGaAlP
    • optical efficiency: 71 lm/W at 350 mA (82 lm/W at 100 mA)
    • grouping parameter: luminous flux, wavelength
    • soldering methods: reflow soldering
    • preconditioning: acc. to JEDEC Level 2
    • taping: 12 mm tape with 600/reel, ø180 mm
    • ESD-withstand voltage: up to 8 kV acc. to JESD22-A114-D

    Successful usage of high power LEDs:

    Heat management
    Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

    Drive management
    LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

    EMC protection
    LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

    Storage / JEDEC level
    The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

    Soldering conditions
    Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.



    Delivery time

    Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.