×
Facebook Messenger

Chat with us!

You agree that data will be send to Facebook


Privacy statement
    Osram Oslon SSL 80   >   OSRAM Oslon SSL 80 warm-whiteCRI 95

OSRAM Oslon SSL 80 warm-whiteCRI 95

Oslon SSL 80 LCW CR7P.CC-KQKS


Version

Technical Data

Unit Value
Light color warm-white
Beam 80°
Height 2.35mm
Width 3.1mm
Length 3.1mm
 
Unit min. typ. max.
Lumen 22.89lm 76.3lm 155.8lm
Kelvin 2700K
CRI 90 96
Voltage 2.8V 2.95V 3.25V
Current 100mA 350mA 800mA

Downloads

Datasheet 3.04 MB

Description

The Osram OSLON SSL is a convenient alternative for lighting applications with high demands. Because of the wide viewing angle of 80° many applications do not need additional secondary optics anymore.

Features

  • package: SMt ceramic package with silicon resin with lens
  • typical Luminous Flux: 74 lm at 350 mA and up to 127 lm at 700 mA (2700 K)
  • feature of the device: small size high-flux LED for slim designs
  • typ. color temperature: 2700 K
  • color rendering index: 95 (typ.)
  • viewing angle: 80°
  • typical optical efficiency: 66 lm/W at 350 mA (4000 K)
  • grouping parameter: luminous flux, color coordinates, forward voltage
  • soldering methods: reflow soldering
  • preconditioning: acc. to JEDEC Level 2
  • taping: 12-mm tape with 600/reel, ø180 mm
  • ESD-withstand voltage: up to 8 kV acc. to JESD22-A114-D
  • Lumen maintanance test report according to IESNA LM-80 available

    Successful usage of high power LEDs:

    Heat management
    Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

    Drive management
    LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

    IP protection
    Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.

    EMC protection
    LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

    Storage / JEDEC level
    The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

    Soldering conditions
    Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.



    Delivery time

    Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.