|from 1||3,35 €||3,99 €|
The latest addition to the SYSTEM range of LED-TECH.DE.
The Slider modules are individually placeable Plug&Light light sources available
with different LED types, light colors and color temperatures. The pcbs can be
repositioned and fixed as often as required without any damage by means of sliding
nuts sliding in the profile. A special thermal pad on the bottom not only provides
non-slip grip but also optimal permanent heat dissipation.
Between the terminals the Slider have enough space for secondary optics with which the radiation characteristics can be adapted to your wishes. Optics are also available in our shop.
We distinguish the SYSTEM modules between CC and CV modules. Please note the product subtitle.
The Osram OSLON SSL is predestinated for lighting applications with high demands. Because of the wide viewing angle of 80° many applications do not need additional secondary optics anymore.
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.