Unit | Value | ||
---|---|---|---|
Light color | UV | ||
Outer diameter | 19.9mm | ||
Beam | 120° | ||
Height | 4.5mm | ||
Unit | min. | typ. | max. |
Radiantflux | 920mW | 1250mW | |
Wavelength | 365nm | ||
Voltage | 3.6V | ||
Current | 700mA |
Datasheet | 864.48 KB |
SSC VIOSYS CUN66B1B on Star PCB
High
Power UV LED Series are designed for high current operations and high
power output applications. It incorporates state of the art SMD design
and low thermal resistant material. Z5 NUV LED is ideal UV light source
for curing, printing and detecting applications.
Applications
• UV Curing
• Printing
• Coating
• Adhesive
• Fluorescence Photography
• Dental Curing
• Oil leak Detection
Features
• Max.Current 700mA
• Low thermal resistance
• SMT solderable
• Lead Free Product
• RoHS Compliant
Safety
for eyes and skin The Products emit high intensity ultraviolet light
which can make your eyes and skin harmful. So do not look directly into
the UV light and wear protective equipment during operation. Please
refer to the relevant data sheet from manufacturer!
Successful usage of high power LEDs:
Heat management
Applications with high power LEDs need enduring, adequate and plane
heat conduction from the first moment of use. It is very important and
neccessary to get the heat off the devices to ensure the maximum light
output, lifetime and efficiancy.
Drive management
LEDs should be run with a constant current in addition to the
manufacturers recommendations. To ensure this we recommend to take
constant current power supplies because resistors are always a risk
factor in high power LED applications.
IP protection
Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.
EMC protection
LEDs are sensitive against heat and electric charge. Please avoid any
kind of short circuits or electric discharge to the illuminant. The chip
can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry
ambience. After opening a sealed bag the content should be mounted
rapidly. Once absorbed humidity can be removed by tempering the LEDs in
some cases. More information can be found in the manufacturers
datasheets or on the manufacturer homepages.
Soldering conditions
Each LED has its own soldering conditions that the user should pay
attention to. After the launched lead free processing specifications
many standarts have changed. Information about recommended soldering can
be found in the manufacturers datasheets or on the manufacturer
homepages.