|from 1||3,77 €||4,49 €|
The new XLamp XP-G3 White High CRI !
The XLamp XP-G3 LED bases upon the excellent performance of the original XP-G2 by increasing the lumen output up to 31% while providing a single die LED point source for precise optical control.
The XP-G3 LED shares the same footprint as the original XP-E/G.
XP-G3 LEDs are the ideal choice for lighting applications where high light output and maximum efficacy are required, such as LED light bulbs, outdoorlighting, portable lighting, indoor lighting and solar-powered
- Max. drive current: 2000mA
- ANSI-compatible chromaticity bins
- Low thermal resistance: 3°C/W
- Wide viewing angle: 125°
- Unlimited floor life at <= 30°C/85% RH
- Reflow solderable (JEDEC J-STD-020C)
- Electrically neutral thermal path
- UL® recognized component (E349212)
- RoHS- and REACh compliant
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.