Facebook Messenger

Chat with us!

You agree that data will be send to Facebook

Privacy statement
    Bridgelux Vesta®   >   Bridgelux Vesta® COB CSP Tunable White 25W CRI 90 2700K-5000K (LES 13mm)

Bridgelux Vesta® COB CSP Tunable White 25W CRI 90 2700K-5000K (LES 13mm)


Amount Netto Brutto
from 1 16,72 € 19,90 €
Prices plus shipping costs

Part number:

Target country of delivery


Technical Data

Unit Value
Height 1.4mm
Width 18.8mm
Length 18.8mm
Unit min. typ. max.
Lumen 1960lm 2340lm
Kelvin 2700K 5000K
CRI 90
Current 700mA 1400mA


Datasheet 764.24 KB


Bridgelux Vesta® COB CSP Tunable White 25W CRI 90 2700K-5000K (LES 13mm)

Vesta® Series Tunable White Array products deliver adaptable light in a solid state lighting package. Vesta® Series products tap into the powerful mediums of light and color to influence experience, well-being, and human emotion. They allow designers to mimic daylight to increase productivity and well-being, retailers to influence shopper behavior and fixture manufacturers to simulate the familiar glow and dimming of incandescent lamps. This high flux density light source is designed to support a wide range of high quality directional luminaires and replacement lamps for commercial and residential applications.

Lighting system designs incorporating these LED arrays deliver comparable performance to 150 Watt incandescent-based luminaires, while increasing system level efficacy and prolonging service life. Typical luminaire and lamp types appropriate for this family include replacement lamps, down lights, wall packs and accent, spot and track lights.








700 mA
1400 mA
33.2 V
35.2 V
35.3 V
37.6 V
37.4 V
39.9 V

700 mA
1400 mA

34.1 V
36.6 V

38.9 V
38.5 V
41.2 V


  • Tuning range from 2700K-5000K
  • Efficacy of 103 lm/W typical
  • Uniform, high quality illumination
  • Minimum 90 CRI option
  • More engery efficient than incandescent, halogen and fluorescent lamps
  • Industry standardized dimensions
  • Flux packages from 1090 to 2275 lumens typical


  • Superior color mixing enabled by phosphor dispensed technology
  • Compact system design
  • High quality, ture color reproduction
  • Reliable operation facilitated by high conductivity substrates
  • Enhanced optical control
  • Uniform, consisten white light

Successful usage of high power LEDs:

Heat management
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

Drive management
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

IP protection
Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.

EMC protection
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

Soldering conditions
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.

Delivery time

Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.