|from 1||14,20 €||16,90 €|
75x Samsung LM301B stripe 5700k
Solderless stripes PCB with sockets for rigid strands (0.2 - 0.75 mm²).
Easy feeding without soldering! The insulated conductor is simply inserted into the clamping point as far as it will go and automatically fixed securely. Please use solid and stripped wires.
|0,35 A||7,87 V
|0.7 A||8,02 V||5,614 W|
|1,0 A||8,11 V||8,110 W|
|1,4 A||8,22 V||11,508 W|
|2,1 A||8,39 V||17,619 W|
|2.8 A||8,53 V||23,884 W|
|3,5 A||8,67 V||30,345 W|
|4.0 A||8,76 V||35,040 W|
|5.0 A||8,93 V||44,650 W|
|0.35 A||620 lm||225,09 lm/W|
|0,7 A||1237 lm||220,34 lm/W|
|1,0 A||1756 lm||216,52 lm/W|
|1,4 A||2438 lm||211,85 lm/W|
|2,1 A||3599 lm||204,27 lm/W|
|2.8 A||4730 lm||198,04 lm/W|
|3,5 A||5824 lm||191,93 lm/W|
|4.0 A||6593 lm||188,16 lm/W|
|5.0 A||8087 lm||181,12 lm/W|
The values shown in the table are averages of the 5700K modules.
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.