|from 1||19,24 €||22,90 €|
50cm MIXED alu stripe with 60x Samsung LM301B 3500K + 5x Osram OSLON SSL far-red LEDs
The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.
Most compact high-power LED of the third generation of OSLON Square with well known
superior robustness, high reliability, long lifetime and low thermal
The advantages at a glance:
- easy installation
- high luminous flux
- individually stackable
- based on constant current
- 60x Samsung LEDs per board
- 5x Osram LEDs per board
- very good price / performance ratio
- fast and easy handling through plug-in system
- optimized surface illumination, e.g. grow, advertising space
||21.55 V||4.310 W|
||22.00 V||6.600 W|
||22.20 V||7.770 W|
||22.40 V||8.960 W|
||23.09 V||13.854 W|
|0.700 A||23.42 V||16.394 W|
|0.800 A||23.74 V||18.992 W|
|0.900 A||24.04 V||21.636 W|
|1.000 A||24.33 V||24.330 W|
||581 lm||134.99 lm/W|
||869 lm||131.76 lm/W|
||1013 lm||130.37 lm/W|
||1155 lm||128.91 lm/W|
||1434 lm||125.96 lm/W|
||1712 lm||123.57 lm/W|
|0.700 A||1986 lm||121.14 lm/W|
|0.800 A||2255 lm||118.73 lm/W|
|0.900 A||2526 lm||116.75 lm/W|
|1.000 A||2793 lm||114.80 lm/W|
Scope of delivery:1x LT-4238 50cm MIXED alu stripe with 60x Samsung LM301B 3500K + 5x Osram OSLON SSL far-red LEDs
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.