|from 1||14,20 €||16,90 €|
|from 15||12,52 €||14,90 €|
50cm Alustripe with 98x Samsung LM301H CRI90 3500K LEDs.
The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.
The LEDs are arranged so that the boards can be arbitrarily extended without leaving a gap in the assembly density.
|0.350 A||18.50 V||6.47 W|
|0.700 A||18.89 V||13.22 W|
|1.050 A||19.20 V||20.16 W|
|1.400 A||19.46 V||27.24 W|
|1.750 A||19.70 V||34.48 W|
|2.100 A||19.90 V||41.79 W|
|2.800 A||20.33 V||56.92 W|
|0.350 A||1169 lm||180.68 lm/W|
|0.700 A||2314 lm||175.04 lm/W|
|1.050 A||3420 lm||169.64 lm/W|
|1.400 A||4505 lm||165.38 lm/W|
|1.750 A||5537 lm||160.59 lm/W|
|2.100 A||6561 lm||157.00 lm/W|
|2.800 A||8473 lm||148.86 lm/W|
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.