|from 1||10,84 €||12,90 €|
|Operating temperature||-40 ~ +85|
49x Samsung LM301B Square 50 High-Performance 3500K
Solderless square PCB with sockets for rigid strands (0.2 - 0.75 mm²).
|100 mA||18,31 V||1,830 W|
|350 mA||18,87 V||6,600 W|
|700 mA||19,38 V||13,570 W
|1050 mA||19,79 V||20,780 W
|1400 mA||20,11 V||28,150 W|
|100 mA||397 lm||216,93 lm/W|
|350 mA||1355 lm||205,16 lm/W|
|700 mA||2611 lm||192,47 lm/W|
|1050 mA||3773 lm||181,57 lm/W|
|1400 mA||4883 lm||173,44 lm/W|
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.