|from 1||16,72 €||19,90 €|
PWM dimmer for high power LEDs!
This analog PWM dimmer is primary made especially for high power LED applications which are run on specific forward currents. The pulse width modulation provides a 5-100% dimming of constant currents or voltages. Using the arrow keys on the remote control allows you to dimm in 20 steps.
No soldering neccessary. All links are done by plug or screw connection.
Special features with remote controll: The IR remote allows you to start onboard special effects. There are 2 blinking modes with 0,3 up to 20Hz and 2 fading modes from 0,3 up to 67 seconds available. Extensivly explained in the included manual.
Max. operating range V: 7-35V
Max. operating range A: 10A (350W @ 35V)
Standby current: 16mA
Input: Short circuit protected
PWM frequency: 1000Hz
PCB dimensions (HxWxD): 31,2 x 30,9 x 17,1mm
Mounting: M3 drill holes in each corner
Wie offer this dimmer module in two different versions:
LT-2135: Dimmer with potentiometer
LT-2136: Dimmer with IR sensor and remote controll (+ special effects)