×
Facebook Messenger

Chat with us!

You agree that data will be send to Facebook


Privacy statement
    SYSTEM MIXED Slider   >   SYSTEM MIXED slider with 3500K + 730nm

SYSTEM MIXED slider with 3500K + 730nm

CC module* | LM301H ONE | LH351H


Amount Netto Brutto
from 1 4,96 € 5,90 €
Prices plus shipping costs

Part number:
LT-5521



Target country of delivery

Amount


Limited stock

Currently available: 1 pcs.

Frequently bought together

Technical Data

Unit Value
Beam 120°
Height 3.76mm
Width 16.0mm
Length 80.0mm
 
Unit min. typ. max.
Lumen 421lm 811lm 1138lm
PPF 7.60µMol/s 14.65µMol/s 20.49µMol/s
Kelvin 3500K
Wavelength 730nm
Voltage 7.23V 7.52V 7.77V
Current 350mA 700mA 1000mA

Downloads

Datasheet 2.17 MB
Datasheet 1.62 MB
RoHS 444.37 KB
REACH 303.65 KB
Chemical Compatibility 723.42 KB

Product video

Description

SYSTEM MIXED slider with LM301H ONE LEDs in 3500K and LH351H LEDs in 730nm

The latest addition to the SYSTEM range of LED-TECH.DE.

The Slider modules are individually placeable Plug&Light modules available with different LED types, light colors and color temperatures. The pcbs can be repositioned and fixed as often as required without any damage by means of sliding nuts sliding in the profile. A special thermal pad (not included in the delivery) on the bottom not only provides non-slip grip but also optimal permanent heat dissipation.

  • Individually expandable
  • Compatible with all SYSTEM profiles.
  • Easy installation without sticking due to reusable heat conducting foil (not included in the delivery). Secure mounting with SYSTEM slot nuts and screws (mounting kit sold separately).
  • Simple feed without soldering! The stripped conductor is simply inserted into the terminal point as far as it will go and automatically clamped securely. Please use rigid and stripped cables.

  • The PCBs are available in white and black. The extensive range of accessories is constantly expanding and optimizing. Project security: Each individual component can be purchased separately!

    *We distinguish the modules between CC and CV modules. Please note the product subtitle.

  • CC module = Constant Current
  • CV module = Constant Voltage
  • Current Voltage Power
    0.350 A 7.23 V 2.53 W
    0.700 A 7.52 V 5.26 W
    1.000 A 7.77 V 7.77 W
    Current Lumen Lumen/W
    0.350 A 421 lm 166.40 lm/W
    0.700 A 811 lm 154.18 lm/W
    1.000 A 1138 lm 146.46 lm/W
    Current µMol/s µMol/joule
    0.350 A 7.60 3.00
    0.700 A 14.65 2.79
    1.000 A 20.49 2.64
    The values shown in the table are averages of the modules.

    Successful usage of high power LEDs:

    Heat management
    Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

    Drive management
    LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

    IP protection
    Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.

    EMC protection
    LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

    Storage / JEDEC level
    The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

    Soldering conditions
    Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.

    Delivery time

    Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.