|from 1||29,33 €||34,90 €|
Longboards 144 with 144x LM301B 3500K LEDs
Up to 72W power on 98cm.
The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.
The advantages at a glance:
- easy installation
- high luminous flux
- individually stackable
- based on constant current
- can be operated up to 700mA without an additional heat sink (ambient temperature ~ 25 ° C)
- 144x LM301B 3500K Samsung LEDs per board
- very good price / performance ratio
- fast and easy handling through plug-in system
- optimized surface illumination for grow space
|0.100 A||30.91 V||3.09 W|
|0.350 A||31.92 V||11.17 W|
|0.700 A||32.79 V||22.95 W|
|1.050 A||33.48 V||35.15 W|
|1.400 A||34.06 V||47.68 W|
|1.750 A||34.61 V||60.57 W|
|2.100 A||35.09 V||73.69 W|
|0.100 A||679 lm||219.74 lm/W|
|0.350 A||2374 lm||212.53 lm/W|
|0.700 A||4656 lm||202.88 lm/W|
|1.050 A||6852 lm||194.94 lm/W|
|1.400 A||8985 lm||188.44 lm/W|
|1.750 A||11030 lm||182.10 lm/W|
|2.100 A||13028 lm||176.79 lm/W|
Scope of delivery:1x LT-5484 Longboards 144 with 144x LM301B 3500K LEDs
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.