Unit | Value | ||
---|---|---|---|
Light color | white | ||
Height | 27mm | ||
Width | 32mm | ||
Length | 80mm | ||
Unit | min. | typ. | max. |
Voltage | 7V | 24V | |
Current | 50mA |
LedStyles L!VE Campaign No. 7
The LedStyles Guardian is a multifunctional little helfer for home and office. It combines sensor-, light- and sound features and can be used as...
- Temperature guard (frost & heat)
- Humidity guard (wet & dry)
as well as a
- LED torch
Additional options like durating or interval acustic signal (see picture galery) can be adjusted by using the onboard dip switch.
The Guardian is a construction kit. Only the IC is already mounted. The Guardian has been developed for use with a common 9V battery. The User just clipses the PCB onto the battery and it is ready to work. The battery is power supply and stand off at the same time. At the bottom side of the PCB we placed to connection pads for external wires to use the Guardian as...
- Temperature guard: Works at<=2°C (frost alert) and >=40°C (heat alert). Temperatures can be changes by programming other values. Do to so please have a look at the bottom connectivity information.
- Humidity guard: Can be adjusted to give alert when contacts get dry or wet. Very useful to avoid water damages at home or your flower die of too low water level.
- LED torch: There is always need to have a little more light when working on something at home, in the garage or somewhere else.
The features can be adjusted by using the onboard dip switch. All function have been printed on the backside to but only in german. Here is the english translation:
1. LED torch (on/off)
2. Temperature alert (on/off)
3. Humidity alert (on/off)
4. Mode of humidity alert: wet /dry
5. Piezo (on/off)
6. Mode of piezo: interval / durating signal
Connectivity:
ISP:
1 - MISO (square pd)
2 - Vcc
3 - SCK
4 - MOSI
5 - RST
6 - GND
Pinbelegung:
Port C.5 - Dip switch 1
Port C.4 - Dip switch 2
Port C.3 - Dip switch 3
Port C.2 - Dip switch 4
Port C.1 - Dip switch 5
Port C.0 - Dip switch 6
Port B.0 - LED
Port B.1 - Piezo
ADC6 - Temperatur sensor
ADC7 - humidity sensor
Please have a look at the picture galery that shows all above information in detail again.
The kit includes an assembly diagram as well as a parts list.
FAQ:
Q: Can I use other LEDs?
A:
Yes no problem. If the new LED need an other forward current please
change the resistor on the bottom left side (see picture galery) to give
the LED the current it needs. The LED channel has a constant voltage of
5V.
Q: Why is the IC already mounted?
A: Because of the very filigran pinning. We also have the possibility to make a final function check.
Q: What is LedStyles?
A:
LedStyles is the support forum of LED-TECH.de. LedStyles L!VE is a
helping way to give some experience with electronic components to the
user. The LedStyles L!VE construction kits can also be granted for FREE.
Read more in our forum.
Overview of the last LedStyles L!VE campaigns:
9. Campaign: Basic RGB Controller (LT-2082)
8. Campaign: USB LED-Cube (LT-1739)
7. Campaign: Guardian (LT-1644)
6. Campaign: FunnyMatrix64 (LT-1599)
5. Campaign: MultiLine RGB Mini Controller V2.0 (LT-0215)
4. Campaign: Balance (LT-1514)
3. Campaign: Twilight Switch (LT-1390 und LT-1391)
2. Campaign: X-WIN (LT-1377)
1. Campaign: Binary Watch (LT-1236)