|
Part Number: LT-1175
ACULED VHL (4chip UV LED)
Manufacturers Part No.: ACL01-SC-UUUU-E05-C01-L-O000
| Diameter: |
14mm |
| Viewing Angle: |
130° |
| Emitting Color: |
UV |
| Housing Color: |
clear |
| Nanometer: |
400 |
| mW typ.: |
202 mW |
| mW max.: |
320 mW |
| mA test.: |
350 mA |
| mA typ.: |
500 mA |
| mA max.: |
500 mA |
| V typ.: |
4.5 V |
| Watt: |
2,25 W |
|
|
| Datasheet: |
Click here! |
| ACULED series: |
Click here! |
| Forum-Info: |
Click here! |
The new high power UV LED with 4 chips! New: Now available with indiv. Chips (see datasheet) A compact UV LED - designed for operation in speciality lighting applications. This LED is a high power light source utilizing multi chip-on-board (COB) technology. The close chip placement achieves minimum space between the chips. You can find additional optics here. The design is also compact and has a superior optical design. In addition, the copper board provides for superior thermal conductivity. Successful usage of high power LEDs:
Heat management
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
Drive management
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
EMC protection
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Soldering conditions
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.
| Resistor for 5V-Betrieb: |
1 Ohm / 0.25 W |
 |
| Resistor for 9V-Betrieb: |
9 Ohm / 2.25 W |
|
| Resistor for 12V-Betrieb: |
15 Ohm / 3.75 W |
|
| Resistor for 14V-Betrieb: |
19 Ohm / 4.75 W |
|
| Quantity |
Price per pcs. |
|
1 - 9
|
34,90 €
|
|
10 - 49
|
32,90 €
|
|
50 - 99
|
29,90 €
|
| ab 100 |
Special price |
Prices incl. VAT with
additional shipping costs
|
