|
Part Number: LT-1508
Edison Edixeon ARC 1W Star
| Diameter: |
19.90mm |
| Viewing Angle: |
130° |
| Height: |
6.90mm |
| Emitting Color: |
white |
| Housing Color: |
white |
| Lumen typ.: |
80 |
| Lumen max.: |
90 |
| Kelvin typ.: |
6000 |
| mA typ.: |
350 mA |
| V typ.: |
3.1 V |
| V max.: |
4.0 V |
| Watt: |
1,09 W |
|
|
| Datasheet: |
Click here! |
Edisons EDIXEON series is a most welcome and cheap alternative to Luxeon and Seoul LEDs. Emitters and star versions are designed like the competitors products and Edison also uses the well known chips from Epistar, Forepi and Cree (EZ-Bright). The LEDs are very well manufactured and have a long lifetime because of the latest chip generation with excellent parameters. The ARC 1W additional advantage is the unbeatable price which is much lower than competitors like Luxeon and Seoul can offer. Sample measurement: Typical @ 350 mA
Current: 350 mA
Voltage: 3.26 V
Kelvin: 6245 K
Lumen: 91.13 lm
CRI: 74.4 Successful usage of high power LEDs:
Heat management
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
Drive management
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
EMC protection
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Soldering conditions
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.
| Resistor for 5V-Betrieb: |
5 Ohm / 0.67 W |
 |
| Resistor for 9V-Betrieb: |
17 Ohm / 2.07 W |
|
| Resistor for 12V-Betrieb: |
25 Ohm / 3.12 W |
|
| Resistor for 14V-Betrieb: |
31 Ohm / 3.82 W |
|
| Quantity |
Price per pcs. |
|
1 - 99
|
2,99 €
|
|
100 - 499
|
2,49 €
|
|
500 - 999
|
2,29 €
|
| ab 1000 |
Special price |
Prices incl. VAT with
additional shipping costs
|
