|
Part Number: LT-1875
CREE XP-G S2 Emitter
Cree XPGWHT-L1-2S0-S2
| Viewing Angle: |
125° |
| Height: |
2mm |
| Width: |
3,45mm |
| Depth: |
3,45mm |
| Emitting Color: |
white |
| Lumen min.: |
148 |
| Lumen max.: |
510 |
| Kelvin min.: |
5700 |
| Kelvin max.: |
6100 |
| mA test.: |
350 mA |
| mA typ.: |
350 mA |
| mA max.: |
1500 mA |
| V typ.: |
3 V |
| V max.: |
4 V |
| Reverse Voltage: |
5 V |
| Watt: |
1,05 W |
|
|
| Datasheet: |
Click here! |
| Binning & Labeling: |
Click here! |
The new Cree XLamp XP-G in S2 top rank! The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 80% smaller footprint. The XLamp XP-E LED continues Crees history of innovation in LEDs for lighting applications with wide viewing angle, symetrical package, unlimited floor life and electrically neutral thermal path. Overview of the features: - Max. drive current: 1500mA
- Low thermal resistance: 4°C/W
- Wide viewing angle: 125°
- Unlimited floor life at <= 30°C/85% RH
- Reflow solderable (JEDEC J-STD-020C)
- Electrically neutral thermal path
- RoHS compliant Successful usage of high power LEDs:
Heat management
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
Drive management
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
EMC protection
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Soldering conditions
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.
| Resistor for 5V-Betrieb: |
6 Ohm / 0.7 W |
 |
| Resistor for 9V-Betrieb: |
17 Ohm / 2.1 W |
|
| Resistor for 12V-Betrieb: |
26 Ohm / 3.15 W |
|
| Resistor for 14V-Betrieb: |
31 Ohm / 3.85 W |
|
| Quantity |
Price per pcs. |
|
1 - 19
|
5,99 €
|
|
20 - 49
|
5,49 €
|
| ab 50 |
Special price |
Prices incl. VAT with
additional shipping costs
|
