LED Leuchten Shop

S-Line: The new SAMSUNG PCB family by LED-TECH.DE

The Samsung S-Line modules are available in 3 different lenghts. Even non-skilled users can connect them to each other very easily. We recommend not to run more than 2 meters of modules in series connection because of thermal facts. After 2 meters the power should be injected again.

Quality: As a second level designers we only use the latest and brightest selections available. We do this to guaranty a long durating maximum of brightness and color fidelity. Our internal laboratory also does close meshed binning controls on every selection that goes into production.

Flexibility: The modules contain 6 mid power SMDs on each 10cm. Each LED contains 3 chips which causes an enormous light output! The LEDs are placed homogeneously on the circuit boards which means that two connected PCBs do not have a light gap (dark part). The space between two LEDs is the same from module to module which grants a maximum in illumination quality.

Dimensions: The PCBs are intentionally only 10mm wide to use them with most of common LED profiles. The three available lengths of 10, 20 and 30cm let you reach any wished total length you want. 20cm and 30cm PCBs can (of corse) be seperated into 10cm pieces, too.

Power supply: We use onboard current regulators for maximum safety and LED lifetime. Each 10cm piece can also be driven on its own. The power consumption is only 60mA/10cm (1.44W/10cm). Please always watch the polarity which is also printed onto the PCBs.

Mounting: The PCBs can be sticked into common profiles, glued and screwed to other surfaces. Each 10cm piece has 2 drill holes of 3.5mm width.

Alternatives: We offer the S-Line modules in cold-white, neutral-white and warm-white. Each color also in 10cm, 20cm and 30cm length.

individual resistor calculation

individual resistor calculation