×
Facebook Messenger

Chat with us!

You agree that data will be send to Facebook


Privacy statement
   

50cm Alustripe with 98x Samsung LM301H LEDs 3500k and connectors CRI90

14 LEDs parallel, 7 parts in series

Varianten

UVP 20,99 €

Amount Netto Brutto
from 1 14,20 € 16,90 €
Prices plus shipping costs

Part number:
LT-4520



Target country of delivery

Amount

Technical Data

Unit Value
Light color warm-white
Housing Color white
Beam 120°
Height 5.4mm
Width 16.0mm
Length 499.9mm
 
Unit min. typ. max.
Lumen 1169lm 4505lm 8473lm
PPF 17.71µMol/s 67.50µMol/s 125.78µMol/s
Kelvin 3500K
CRI 90
Voltage 18.50V 19.46V 20.33V
Current 350mA 1400mA 2800mA

Downloads

RoHS 444.37 KB
REACH 303.65 KB
Chemical Compatibility 723.42 KB
Datasheet 2.19 MB

Description

50cm Alustripe with 98x Samsung LM301H LEDs and connectors CRI90

The Samsung LM301B is currently one of the most efficient LEDs on the market and exceeds the 200lm/W limit.

The LEDs are arranged so that the boards can be arbitrarily extended without leaving a gap in the assembly density.

Easy feeding without soldering! The insulated conductor is simply inserted into the clamping point as far as it will go and automatically fixed securely. Please use solid and stripped wires.
 

Current Voltage Power
0.350 A 18.50 V 6.47 W
0.700 A 18.89 V 13.22 W
1.050 A 19.20 V 20.16 W
1.400 A 19.46 V 27.24 W
1.750 A 19.70 V 34.48 W
2.100 A 19.90 V 41.79 W
2.800 A 20.33 V 56.92 W
Current Lumen Lumen/W
0.350 A 1169 lm 180.68 lm/W
0.700 A 2314 lm 175.04 lm/W
1.050 A 3420 lm 169.64 lm/W
1.400 A 4505 lm 165.38 lm/W
1.750 A 5537 lm 160.59 lm/W
2.100 A 6561 lm 157.00 lm/W
2.800 A 8473 lm 148.86 lm/W
Current µMol/s µMol/joule
0.350 A 17.71 2.74
0.700 A 34.89 2.64
1.050 A 51.40 2.55
1.400 A 67.50 2.48
1.750 A 82.73 2.40
2.100 A 97.82 2.34
2.800 A 125.78 2.21

Info! Feed in always diagonal, in the same direction to the already applied connectors.

Successful usage of high power LEDs:

Heat management
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.

Drive management
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.

IP protection
Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.

EMC protection
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.

Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.

Soldering conditions
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.

Delivery time

Deliveries within Germany take 2-3 days beginning after receipt of payment, for deliveries to invoice beginning with the shipment, for deliveries to cash on delivery beginning with receipt of order. Payments and incoming orders beyond our business hours let the delivery time begin with the next workday. For deliveries to other EU countries the delivery time may be extended up to 3 weeks. The delivery time is subject to the proper delivery of the logistics company, as far as delivery delays are not caused by us. The validity of the above delivery times requires the availability of the ordered goods from stock at the time the delivery time is beginning.