|from 1||12,52 €||14,90 €|
50cm Alustripe with 98x Bridgelux Thrive LEDs and connectors.
The LEDs are arranged so that the boards can be arbitrarily extended without leaving a gap in the assembly density.
Easy feeding without soldering! The insulated conductor is simply inserted into the clamping point as far as it will go and automatically fixed securely. Please use solid and stripped wires.
About Bridgelux Thrive full spectrum LEDs:
Bridgelux Thrive products are designed to closely mimic the sun and provide a new class of full spectrum, human centric light emitting diode (LED) white point solutions.
Using proprietary chip, phosphor and manufacturing technologies, Thrive closely mimics the spectra of the sun without violet light augmentation. Thrive produces lower blue light intensity at shorter wavelengths and delivers a smoother spectrum over the visual wavelength range, enabling a close spectral match to sunlight. Thrive offers:
|0.350 A||19.02 V||6.66 W|
|0.700 A||19.69 V||13.78 W|
|1.050 A||20.23 V||21.24 W|
|1.400 A||20.73 V||29.02 W|
|1.750 A||21.20 V||37.10 W|
|2.100 A||21.63 V||45.42 W|
|0.350 A||941 lm||141.29 lm/W|
|0.700 A||1897 lm||137.66 lm/W|
|1.050 A||2810 lm||132.30 lm/W|
|1.400 A||3685 lm||126.98 lm/W|
|1.750 A||4499 lm||121.27 lm/W|
|2.100 A||5291 lm||116.49 lm/W|
The values shown in the table are averages of the 4000K modules.
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.