|from 1||5,80 €||6,90 €|
|Operating temperature||-40 ~ +85|
21x Samsung LM301H ONE Stripe 3500K
Solderless stripe PCB with sockets for rigid strands (0.2 - 0.75 mm²).
Easy feeding without soldering! The insulated conductor is simply inserted into the clamping point as far as it will go and automatically fixed securely. Please use solid and stripped wires.
|100 mA||7,80 V||0,780 W|
|350 mA||8,07 V||2,825 W|
|700 mA||8,31 V||5,817 W|
|1050 mA||8,50 V||8,925 W|
|1400 mA||8,67 V||12,138 W|
|100 mA||203 lm||261.10 lm/W|
|350 mA||699 lm||247,65 lm/W|
|700 mA||1357 lm||233,28 lm/W|
|1050 mA||1983 lm||222,18 lm/W|
|1400 mA||2585 lm||212,97 lm/W|
Successful usage of high power LEDs:
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
Unless otherwise stated, the modules are not protected against high humidity or splashing water. If LEDs are used in areas that require increased protection, this must be manufactured according to the requirements.
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from -30°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.